11/9/2023 0 Comments Hidden door diyTo mount the hinges, I used a self-centering drill bit – trust me, you need this! First, I attached the hinges to the doors. Luckily, these hinges are great quality, can support up to 110lbs, and are super affordable! I bought a total of 10 different sets of hinges before finding something that would support the weight, give the slats the needed clearance, and still be as hidden as possible. ![]() Attach the Hinges and Mount Your Doorsįinding the right hinges for my hidden french doors was quite the task. If I were to do this again, I would definitely brace the doors with square aluminum to help keep them from warping.Ģ. I also added braces across the middle to help keep the door solid. To build my doors, I used 1″ x 3″ x 8′ primed wood boards and attached them using pocket holes. Do yourself a favor, and don’t make it so your doors are taller than 8ft like I did! It will make your life so much easier. So, for my door: 22.125” – 1/4″ – 1/8” = 21.75” wide per door.įor the door height, I measured the height of the opening, and then subtracted 1/4″ to leave space on the bottom, and 1/4″ to account for the hinge on top. 1/4”) and then subtract 1/8” for the opening between the doors. Next, subtract the space needed for the hinge (approx. Since my total opening was 44.25”, that meant I had 22.125” per door. It turned out that my “level” door jamb angled in toward the bottom by about 1/4″, so I built my doors based off of the narrowest part.įor French doors, to measure for the door width, first divide the total opening width in half. I made sure to measure across at multiple points in case the frame was warped at all. To build the doors, I measured the total width of each opening. ![]() In my case, I chose to have two large openings with two sets of French doors. The next step is to build doors to fit the opening for the shelves. Okay, so at this point we are starting with completed shelves and a wall.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |